F-12 纤维/RE14复合材料压力容器成型工艺研究

研究讨论了缠绕过程中几种主要工艺参数对F— 12纤维 /RE14配方Φ15 0mm压力容器复合材料性能的影响。结果表明 :采用“交替”铺层方式缠绕成型 ,含胶量控制在 30 %～ 4 0 % (质量分数 ) ,缠绕张力控制在 15 0N～ 2 0 0N ,采用GPC谱图控制固化时机 ,得到的复合材料综合性能较好 ;用优化出的工艺参数进行了Φ4 80mm压力容器试验 ,结果表明其容器特性系数PV/W值为 37.0 2km ,纤维强度转化率高达73.2 6 %。     

TA12钛合金电子束焊接的显微组织和力学性能

采用电子束焊接对10mm TA12钛合金进行了焊接,焊缝表面形成良好.对TA12钛合金电子束焊接试样进行了金相分析和静力试验、冲击试验和扫描电镜(SEM)分析.结果表明,焊接接头熔合区、热影响区和母材区的微观组织差别明显;随着等轴α相体积分数的减少,接头塑性和冲击韧性值降低,但是拉伸强度变化不大.     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

Evaluation of geomagnetic field models using magnetometer measurements for satellite attitude determination system at low earth orbits: Case studies

In this study, different geomagnetic field models are compared in order to study the errors resulting from the representation of magnetic fields that affect the satellite attitude system. For this purpose, we used magnetometer data from two Low Earth Orbit (LEO) spacecraft and the geomagnetic models IGRF-12 (Thébault et al., 2015) and T89 (Tsyganenko, 1989) models to study the differences between the magnetic field components, strength and the angle between the predicted and observed vector magnetic fields. The comparisons were made during geomagnetically active and quiet days to see the effects of the geomagnetic storms and sub-storms on the predicted and observed magnetic fields and angles. The angles, in turn, are used to estimate the spacecraft attitude and hence, the differences between model and observations as well as between two models become important to determine and reduce the errors associated with the models under different space environment conditions. We show that the models differ from the observations even during the geomagnetically quiet times but the associated errors during the geomagnetically active times increase. We find that the T89 model gives closer predictions to the observations, especially during active times and the errors are smaller compared to the IGRF-12 model. The magnitude of the error in the angle under both environmental conditions was found to be less than 1°. For the first time, the geomagnetic models were used to address the effects of the near Earth space environment on the satellite attitude.     

TA12钛合金加力筒体局部异常变色失效分析

针对某航空发动机在试车过程中多次出现加力筒体尾端局部区域异常变色现象,为了分析其故障原因,利用外观检查、材质分析和温色模拟试验等失效分析方法,确定了故障加力筒体变色部位经历了最高850℃左右的超温。为进一步评价故障加力筒体的可靠性,对其基体材料力学性能及组织演变规律开展研究。在TA12钛合金板材空冷状态下,从加热温度与组织及力学性能的关系分析结果表明:其力学性能随加热温度的升高呈先降低再提高的趋势,在800℃左右达到最低值,且力学性能变化趋势与组织形态演变呈明显的对应关系。根据加力筒体故障部位力学性能及可靠性明显降低的试验结果,判断该加力筒体不再适合继续参与服役试车,建议更换该故障件,并对替换件进行监控。     

骨特异性转录因子Runx2对抗空间骨丢失效应的初步研究

为了构建稳定过表达Runx2 (骨特异性转录因子)的C2C12 (小鼠成肌细胞)和MG63 (前成骨细胞)细胞株, 并用于研究Runx2在对抗空间骨丢失效应中的作用. 利用实时定量聚合酶链式反应鉴定Runx2下游基因I型胶原、碱性磷酸酶表达情况, 在二维回转器中培养稳定细胞株, 通过定量聚合酶链式反应,观察在模拟失重效应下Runx2基因对其下游基因表达的影响. 结果表明, 通过筛选获得稳定转染的C2C12-Runx2和MG63-Runx2细胞株, 经鉴定都能过表达Runx2. 转染后的细胞 I 型胶原和碱性磷酸酶mRNA表达增高. 回转组与对照组相比, MG63, C2C12-Runx2, MG63-Runx2细胞的I型胶原和碱性磷酸酶mRNA表达降低, 但在模拟失重效应下, 转染细胞中I型胶原和碱性磷酸酶的mRNA表达下降程度明显低于未转染细胞株. 所构建的C2C12-Runx2和MG63-Runx2细胞株比较稳定, 并证实Runx2能部分对抗失重引起的成骨特异性分子的降低.      

LY12CZ的腐蚀性能研究

利用从飞机长桁上截取的LY12CZ材料作出的试件分别在三种腐蚀环境下作了腐蚀实验.实验结果证明在加工时的挤压变形程度、腐蚀液的浓度对LY12CZ的腐蚀都有影响;SO2对LY12CZ的腐蚀现象主要是点蚀.     

空间核电源系统整流装置设计

为满足我国未来深空探测、星表基地等空间任务电源系统的需求,针对空间核电源系统,为解决高压高频输入导致高谐波输出的问题,本文提出了利用12脉波整流器来实现交直流变换。在本文的拓扑结构中,重点研究三相三绕组隔离型变压器、三抽头平衡电抗器及LLC谐振变换器的参数设计。通过三相三绕组隔离型变压器产生30°相位差的两组电压,进而产生12脉波,三抽头平衡电抗器可以改善输出侧的电能质量。本文利用LLC谐振电路实现隔离降压,使输出更稳定,并采用Matlab中的Simulink对提出的拓扑进行仿真验证。验证成功后,对整流装置硬件进行搭建,实现了空间核电源系统整流装置的设计。结果表明:该拓扑不仅可以达到稳定的直流输出,而且具有高功率因数校正的特点。     

LY12CZ铝合金材料的室温和高温单轴循环变形行为及其时间相关性

 对LY12CZ铝合金室温和高温下的单轴循环变形行为及其时间相关特性进行了实验研究,重点讨论了环境温度、应力水平、加载波形和峰值保持对材料棘轮行为的影响。结果表明：室温和高温下,LY12CZ铝合金体现出循环硬化特性,并具有明显的应变幅值依赖性;材料的棘轮行为不仅依赖于当前的平均应力和应力幅值大小,还与加载历史密切相关。尽管LY12CZ铝合金在单调拉伸时对应变率的变化不敏感,但其循环棘轮行为具有明显的时间相关特性：有峰值保持时产生的棘轮应变明显大于没有保持时的值,并随保持时间的增加而增大;正弦波形下的棘轮应变大于三角波形下的棘轮应变。     

CuO/CNTs复合催化剂的制备及对FOX-12热分解的催化性能

以醋酸铜和碳纳米管为原料,采用溶胶浸渍法在常压低温(100℃)下制备出CuO/CNTs复合催化剂,采用XRD、TEM、ICP等对催化剂进行表征,并用DSC研究催化剂对FOX-12热分解特性的影响。TEM结果表明,纳米CuO以8~10 nm的椭球形粒子和宽度为5 nm、长度为50 nm的棒状粒子2种形态附着在碳纳米管表面。催化剂使FOX-12分解峰温降低、放热量增加、表观活化能降低,表现出良好的催化性能。当FOX-12与催化剂以质量比5:1混合时,FOX-12热分解峰温降低了20.3℃,ΔH增加了332 J/g。